Product Description
Powerful cell phone antenna, requires NMO mount. Typically installed through-the-roof.
Compatible with all generations of CDMA, GSM and TDMA including GSM, GPRS, EDGE, UMTS, HSDPA, CDMA, 1xRTT, EVDO, TDMA, AMPS, iDEN, Nextel
Detailed Description
The Wilson Cellular NMO Trucker antenna (whip only) requires a standard NMO mount (sold separately). Most NMO mounts are installed by drilling a hole in the roof of your vehicle. The cable is then routed under the headliner to the cellphone's location. This provides for an excellent ground plane and very solid permanent installation. Trunk lip mounts are also available.
A phone adapter cable is required to connect Wilson Cellular antennas to your phone.
Features:
Dual-Band & Tri-Mode: 800MHz & 1900MHz Analog and Digital
Compatible with all Cellular, PCS and iDEN providers
Multiple NMO mounting options are available (sold separately)
Metal ground plane required
10 to 15 times more signal than a cell phone used inside vehicle without an external antenna
Patent Pending
Requires:
Phone Adapter Cable: All Wilson Cellular Antennas require a phone adapter cable in order to connect to your cell phone
NMO Mount
Documents:
Specifications
Part Number 301112
Frequency Range 806-894MHz, 1850-1990MHz
Impedance 50 Ohms
Antenna Gain 4.9dBi (806-894MHz), 5.9dBi (1850-1990MHz)
System Gain 10 - 15dB
Radiation Omni
Polarization Vertical
Wavelength 1.0 (806-894MHz), 2.1 (1850-1990MHz)
Ground Plane Metal Ground Plane Required
Connector FME Female
Height 13.88"
Mount NMO Mount Types (Sold Separately)
Trunk Mount (14' Coax)
3/8" Hole - Roof Mount (14' Coax)
3/4" Hole - Roof Mount (14' Coax)
|
Overstock Clearance
