Product Description
Cellular Amp/BDA for providing wireless in-vehicle coverage (Cell Phone Amplifier/Repeater)
Detailed Description
Wilson Cellular In-Vehicle Amplifiers extend cellular services in poor coverage areas by amplifying both transmit and receive signals. The amplifier reduces problems with signal fades and dropped calls while improving voice quality, service range and access. Wilson Cellular amplifiers are network-compatible and enhance the cellular phone user's satisfaction without compromising the operation of the cellular system.
Features:
Passes TIA/EIA-98-E Transmit test for evaluation CDMA Cellular Phones
Power Control Logic ensures maximum output power is within Cellular Standards
Allows multiple phones to be used simultaneously
Allows cellular phone to operate properly with all types of modulations including CDMA
Maximum 3 Watts output power
Designed for all cellular systems: AMPS, CDMA, EDGE, GPRS, GSM and TDMA
Automatic Gain Control
Overload Protection Circuit - Protects cell system from overload
Automatic Reset - if overload occurs
FCC Type Accepted
Includes:
Interior low profile antenna
Cigarette lighter power plug (12V Hardwire Harness Available)
Requires Exterior Antenna:
Recommend Wilson Cellular Dual-Band Magnetic Mount antenna or NMO (through-the-roof) Mount antenna
Wilson Cellular Dual-Band Glass Mount antenna not recommended.
Notes:
Interior Cellular signal range is 3' to 4' away from the interior antenna. This is because if the interior and exterior antenna signals interfere with each other the system will not work. This is the reason that the glass mount antenna is not recommended.
Compatibility:
Compatible with all 800MHz Cellular providers (CDMA, TDMA, GSM, Analog). For example, most Verizon, AT&T TDMA, Alltel, US Cellular and many more
Not compatible with 1900MHz PCS (AT&T GSM, Sprint PCS, T-Mobile, Qwest) or iDEN (Nextel, Southern LINC, Mike)
Specifications
Part Number 801101
Frequency 824-849MHz Uplink
869-894MHz Downlink
Gain (up/down) 37dB / 37dB
Linear Output Power +30dBm
Max Output Power 3 Watts
Max RF (up/down) +35dBm / +10dBm
Noise Figure (down) 4dB Nominal
Flatness +/- 4dB
Isolation > 90dB
Power Consumption 12V, 1.5A
Connectors FME Male, 50 Ohms
Dimensions 5.5 * 4.3 * 1.4 (inch)
Weight 1.32 lbs
|
Overstock Clearance
