Wilson Cellular 37dB In-Vehicle Wireless Bi-Directional Amplifier for iDEN (Nextel, Southern LINC, Mike)

Cellular Amp/BDA for providing wireless in-vehicle coverage (Cell Phone Amplifier/Repeater)

Detailed Description
Wilson Cellular In-Vehicle Amplifiers extend cellular services in poor coverage areas by amplifying both transmit and receive signals. The amplifier reduces problems with signal fades and dropped calls while improving voice quality, service range and access. Wilson Cellular amplifiers are network-compatible and enhance the cellular phone user's satisfaction without compromising the operation of the cellular system.

Features:

Allows multiple phones to be used simultaneously
Allows cellular phone to operate properly with all types of modulations
Maximum 3 Watts output power
Automatic Gain Control
Overload Protection Circuit - Protects cell system from overload
Automatic Reset - If Overload Occurs
Designed for iDEN (Nextel, Southern LINC, Mike) Systems
Automatic Gain Control
FCC Type Accepted
Includes:

Interior low profile antenna
Cigarette lighter power plug (12V Hardwire Harness Available)
Requires Exterior Antenna:

Recommend Wilson Cellular Magnetic Mount Antenna for Nextel/iDEN or NMO (through-the-roof) Mount Antenna for Nextel/iDEN
Wilson Cellular Glass Mount Antenna for Nextel/iDEN not recommended.
Notes:

Interior Cellular signal range is 3' to 4' away from the interior antenna. This is because if the interior and exterior antenna signals interfere with each other the system will not work. This is the reason that the glass mount antenna is not recommended.
Compatibility:

Compatible with iDEN (Nextel, Southern LINC, Mike) - both cellular calls and Direct Connect
Not compatible with 800MHz Cellular providers (most Verizon, AT&T TDMA, US Cellualr, analog, etc) or 1900MHz PCS (AT&T GSM, Sprint PCS, T-Mobile, Qwest)
Nextel Rebanding note: Due to interference between the Nextel 800MHz band and the Public Safety 800MHz band, Nextel will be moving their service to the 900MHz band. What this means is that at some point your 800MHz repeater will need to be replaced with a 900MHz repeater.

Specifications

Part Number 804002
Frequency 806-821MHz Uplink
851-866MHz Downlink
Gain (up/down) 37dB / 37dB
Linear Output Power +30dBm
Max Output Power 3 Watts
Max RF (up/down) +35dBm / +10dBm
Noise Figure (down) 4dB Nominal
Flatness +/- 4dB
Isolation > 90dB
Power Consumption 12V, 1.5A
Connectors FME Male, 50 Ohms
Dimensions 5.5 * 4.3 * 1.4 (inch)
Weight 1.32 lbs